Michigan Builders License Practice Test

Contractors working on residential or a combination of residential and commercial buildings must be licensed. Electricians, plumbers and HVAC contractors also have to be licensed. How to Obtain a License for Michigan BuildersThere are three major steps to getting your Michigan Residential Builders or Maintenance and Alteration Contractor License:There are three different steps you need to follow in order to receive a Michigan Residential Builder or Maintenance and Alteration Contractor Licensure:Step One – Complete and pass an approved 60-Hour Builders Pre-license Course.Step 2 – Submit your license application, Certificates of Completion and pay a $195 fee to the State of Michigan for approval. This process typically takes 2-4 weeks.Step 3 – Register with PSI for the State of Michigan Exam.

This will cost $111, and you must pass it on your first try. You receive a free exam prep with this.To schedule your Michigan Builders testing date, you can do so by the following:Call PSI.

They are available 24 hours/day. To make a scheduled appointment, use the Automated Registration System or speak with a representative between 7:30 A.M. Builder’s license exams are held at the following locations:. Southfield.

Lansing. Grand Rapids. Marquette. GaylordYou will know right after the exam if you passed. The PSI will notify the state of Michigan licensing department, and they will send your identification card and license via mail.Two Parts to the Test:Part 1: Business/Law. There will be 50 questions, and you have 75 minutes.

You are required to get get 36 correct.Part 2: Trades/Practices. There will be 100 questions, and you have 150 minutes. You are required to get 73 correct.

Residential Code Book: Do I Have to Purchase to get a License?Michigan state has a requirement that each licensed contractor and builder need to have their own current copy of the Residential Code Book for Michigan. You will need to sign part of the license application, as well as any renewal forms that confirm you own that code book. Michigan Residential Builders or Maintenance and Alteration Exam: Can it be an Open book Exam?The exam can’t be open book at all. The only thing you can take with you to the exam is a silent, battery operated calculator.

However, the calculator can’t have a keyboard on it, or even have the ability to convert the measurements at all. You may want to take two calculators, in case one has a malfunction.

State Exam: What to ExpectThe state exam is separated into two main parts. Part One: Business and Law Exam –There are 50 questions that are part of the exam. You must answer at least 36 questions correctly in order to pass.

The minimum score to pass is a 72%. You can allow yourself 75 minutes to complete the exam. Part Two: – Trades Exam– The Trades Exam is different from the Individual Residential Builder and the Maintenance & Alteration licensing:.

Residential Builder Trades Exam – There are 100 questions on the Residential Builder exam. You need to answer at least 73 questions correctly in order to pass. The minimum score to pass is 73%. You can allow yourself 150 minutes to complete the exam. Maintenance & Alteration Trades Exam – A separate trade exam is required for each trade you are seeking a license in. Each trade exam ranges from 25-50 questions.

Refer to the link below for the PSI candidate information bulletin.The will be included along with a 60-Hour pre-license course. This outlines the topics that are found on the exam. If you are completing one of the exams for an individual trade, go ahead and call us or email us. We will send you an outline for the specific trade you’re interested in. For more information, you can find it at:. Difference Between Residential Maintenance & Alteration Contractor and a Residential Builder: The DifferenceA residential builder may build a brand new home from scratch, or may do different repairs. The builder can decide to contract the entire job.

He or she may have to subcontract for mechanical, electrical, and plumbing work.Residential Maintenance & Alteration Contractors are licensed to perform specific services and trades. They can accept contracts, but only within the services that they have a license to.

It doesn’t matter if the building is new remodeling or construction.M&A Trades and Equivalent letter codes are below:Carpentry (A)Concrete (B)Excavation (D)Insulation Work (G)Masonry (I)Painting & Decorating (J)Siding (K)Roofing (M)Screen & Storm Sash (N)Gutters (O)Tile & Marble (P)House Wrecking (R)Swimming Pools (S)Basement Waterproofing (T)Each of these trades must be performed by a licensee.Residential Builders receive a wall license, as well as a pocket card that shows he or she has the proper license. The Residential Maintenance & Alteration Contractor have a pocket card, but it will only show a letter code that describes the trades that they are licensed with. What if I am Only Working One Trade: Do I need a 60-hour Pre-licensing Course?Yes. The M&A Contractors will have to finish the entire 60 hours of the builders pre-licensure education prior to applying for any license, or even registering for an exam.

There are no exceptions, even if you are only building pools or painting. License Application Approval: Where do I Take my Exam?PSI Exam Services have several testing centers throughout Southfield, Lansing (Holt), Gaylord, Marquette, and Grand Rapids. You can even test out of state with the PSI centers.

California State Contractors Practice Exams

However, you would need to submit the out-of-state form, as well as make special arrangements. You can obtain the form directly on the website at www.psiexams.com. Working in Other States With a Michigan Builders LicenseThe Michigan Builders License can’t be used in other states. My Company is in a Different State: Can I get Licensed With Michigan?The Michigan Builders License can’t be used in other states. Any out of state companies that wish to receive a license in Michigan must include the following with the form: Michigan Application C – Consent to service of process form.

Held a License in the Past: Do I Need the 60-Hour Pre-licensing Course?If you are applying for a relicensure or a license as a residential maintenance and alteration M&A contractor or a residential builder, you might be exempt from any requirements with completing the pre-license course, if the following are met:. An application must be submitted between the dates of September 16 th, 2014 and March 16 th, 2016. You must have held an individual license as a residential maintenance and alteration M&A contractor or residential builder.

Alternatively, you could have held a license as a qualifying officer for a residential maintenance and alteration M&A contractor or residential builder, during the time period of 9-years prior to putting in your application.Note:The prior information discussing the waiver for the pre-licensure course: If, within the last nine years, you were actively licensed – it will be effective until March 2016. The waiver is part of a temporary amendment, which will set to expire on the date of March 16 th, 2016.To make sure of the above information, it’s recommended to call the Builders Unit within the state of Michigan. You can call by phone at (517) 373-8376, and ask them to verify whether you should take part in the 60-hour program. Lead Paint RRP Class: Do I Need It?An 8-hour certification course is needed if you renovate a home or a child-occupied facility that was built prior to 1978. To do this, you must become certified to be a Lead Pain Renovator.